Adhesive filler in buckets

The same recipe in buckets for spatula application — for crews and trim manufacturers when cartridges are not enough.

White1 and 4 kg

AcrylicBase

40–50 kg/m²Initial grab

Ask about the product Open the instructions

Properties and documents

1 kg / 4 kgspatula applicationfor large volumes

For a neat finish

ALL DECOR adhesive filler in buckets, 1 and 4 kg

Trim, mouldings, skirting boardsFilling joints between partsLevelling walls under trimTrim manufacturing and installation

ALL DECOR adhesive filler in 1 and 4 kg buckets: the same acrylic formulation with marble filler as in the cartridge, but for spatula application. It bonds trim, mouldings and skirting boards and fills joints and wall irregularities with the same formulation; after 24 hours it is sanded flush and painted.

Packaging for crews and trim manufacturers: when cartridges are not enough, a bucket is noticeably more economical per square metre.

Bonds and fills with one formulation
Sandable and paintable
No shrinkage
Solvent-free

Properties

Key facts about the formulation and packaging.

Important

Interior use only
Temperature during application and for the next 24 hours not below +15 °C
Substrate moisture up to 8 %; prime loose substrates
Apply with a spatula; close the lid tightly after opening

Base	Acrylic with marble filler
Colour	White, sandable
Initial grab	40–50 kg/m²
Application temperature	From +15 °C
Full cure	24 h
Coverage	Up to 200 g/m²
Packaging	1 kg bucket (6 per box), 4 kg bucket
Storage	+5 to +20 °C, 24 months
Specification	TU 20.30.22-001-38433121-2022