Adhesive filler

An acrylic adhesive with a higher share of marble filler: it bonds trim and fills joints, cracks and wall irregularities with the same formulation.

White290 ml

AcrylicBase

40–50 kg/m²Initial grab

Ask about the product Open the instructions

Properties and documents

bonds and fillssandableno shrinkage

For a neat finish

ALL DECOR adhesive filler · white

Decorative trimMouldingsOrnamentsSkirting boardsFilling joints and gaps between partsLevelling wall irregularities under trim

The same water-based acrylic adhesive as the decor adhesive, but with a higher share of marble filler. This makes the formulation thick and hard after curing: it bonds trim and at the same time fills the joints between parts, the gap between a moulding and an uneven wall, and cut marks. No separate filler is needed.

The joint does not shrink; after 24 hours it is sanded flush and painted. Tools and fresh excess wash off with water.

Sandable and paintable
No shrinkage, hard joint
Fills irregularities
Solvent-free

Properties

Key facts about the formulation and packaging.

Important

Interior use only
Temperature during application and for the next 24 hours not below +15 °C, air humidity 40–60 %
Substrate moisture up to 8 %; prime loose substrates
No more than 10 minutes between application and fixing

Base	Acrylic with marble filler
Colour	White, sandable
Initial grab	40–50 kg/m²
Application temperature	From +15 °C
Open time	Up to 10 min
Full cure	24 h
Coverage	6 mm bead — 14 m per cartridge; up to 200 g/m²
Packaging	290 ml cartridge, net weight 550 g, 12 per box
Storage	+5 to +20 °C, 24 months; freezing down to −30 °C, up to 5 cycles
Specification	TU 20.30.22-001-38433121-2022