SilaFix Universal

The universal acrylic adhesive in industrial packaging — for production lines, workshops and large sites.

White1 and 3 kg

AcrylicBase

50–70 kg/m²Initial grab

Ask about the product Open the instructions

Properties and documents

1 and 3 kgspatula applicationfor manufacturers

For mounting and renovation

SilaFix universal construction adhesive in buckets, 1 and 3 kg

Panels and linear profilesFurniture and trim manufacturingLarge sites and crewsWood, hardboard, MDF, OSB, plasterboard, concrete

A universal water-based acrylic construction adhesive in 1 and 3 kg buckets. The properties match SilaFix FS-50: 50–70 kg/m² grab, an elastic paintable joint, water- and frost-resistant, for interior and exterior work. Applied with a spatula.

Packaging for crews, furniture and trim manufacturers and large sites: per square metre it is noticeably cheaper than cartridges, and for volume orders we discuss individual terms.

The same formulation as SilaFix FS-50, in buckets for spatula application
Elastic, paintable joint
Water- and frost-resistant
Indoors and outdoors

Properties

Key facts about the formulation and packaging.

Important

The joint must not be in permanent contact with water
Temperature during application and for the next 24 hours not below +15 °C
Substrate moisture up to 8 %; prime loose substrates
Close the lid tightly after opening

Base	Acrylic, water dispersion
Colour	White
Initial grab	50–70 kg/m²
Application temperature	From +15 °C
Full cure	24 h
Coverage	Up to 160 g/m²
Packaging	1 kg bucket (6 per box), 3 kg bucket (4 per box)
Storage	+5 to +20 °C, 24 months
Specification	TU 20.30.22-001-38433121-2022