SILAFIX FS-75

An acrylic adhesive without mineral filler: white when applied, clear once dry.

Clear290 ml

AcrylicBase

50–70 kg/m²Initial grab

Ask about the product Open the instructions

Properties and documents

clear jointelasticsolvent-free

For mounting and renovation

SilaFix FS-75 construction adhesive · clear

Plastic, glass, ceramicsPVC, chipboard, MDF, OSBBamboo, corkStone, metalAny trim where the joint must stay invisible

A clear water-based acrylic adhesive without mineral filler, so the dried joint does not show on glass or on light and glossy surfaces. The formulation is white when applied and turns clear as it dries.

It bonds most building and finishing materials: plastic, glass, ceramics, PVC, chipboard, MDF, OSB, bamboo, cork, stone, metal. The joint is elastic, water- and frost-resistant and paintable after curing.

Invisible joint
Universal and elastic
Fast grab
Water- and frost-resistant

Properties

Key facts about the formulation and packaging.

Important

The procedure differs from white acrylics: apply the adhesive to the part, let it dry for 5–6 minutes, then place, press and hold for 4–5 seconds. No more than 10–12 minutes between application and fixing
The joint turns clear only as it dries; a white colour in the first hours is normal
Temperature during application and for the next 24 hours not below +15 °C, air humidity 40–60 %
Substrate moisture up to 8 %; prime loose substrates
Freezing during storage only down to −10 °C

Base	Acrylic, without mineral filler
Colour	Clear when dry
Initial grab	50–70 kg/m²
Application temperature	+15 to +35 °C
Service temperature of the joint	−10 to +90 °C
Open time	Let dry 5–6 min, fix within 10–12 min
Full cure	24 h
Coverage	6 mm bead — 14 m per cartridge; up to 160 g/m²
Packaging	290 ml cartridge, net weight 380 g, 12 per box
Storage	+5 to +20 °C, 24 months; freezing down to −10 °C, up to 5 cycles
Specification	TU 20.30.22-001-38433121-2022