Adhesives & sealants
Manufacturer

EN
Menu
SILAFIX FS-300
PROКЛЕЙ290 ml

Adhesive sealant

SILAFIX FS-300

The strongest formulation in the range: 300 kg/m², grab in 4–5 seconds, holds heavy parts without supports.

White290 ml
MS polymerBase
300 kg/m²Initial grab
Properties and documents
300 kg/m²MS polymerfor heavy partsfrom −20 °Cwet rooms

For mounting and renovation

SilaFix FS-300 super-strong adhesive sealant · white

Window sills, thresholds, skirting boards, cornices, panelsSigns, boxes, letters on façadesMirrors and mirror tilesNatural stone slabsVibration-loaded jointsWet rooms

A super-strong adhesive sealant on hybrid MS polymers with maximum grab, made for heavy parts. The chemistry and applications are the same as FS-150; the difference is grab and viscosity: 300 kg/m² instead of 150, and a noticeably thicker formulation that does not sag under a heavy part.

A part grabs in 4–5 seconds and then holds on its own; its position can be corrected for 30 minutes. The joint is elastic, shrink-free, takes vibration, resists weather and UV and works from −40 to +120 °C. Suitable for wet rooms. After full curing in 24 hours it can be sanded and painted.

  • 300 kg/m², grab in 4–5 seconds without fasteners
  • Repositioning for up to 30 minutes
  • Bonds damp materials, no shrinkage
  • The joint works from −40 to +120 °C
Heavy parts

Properties

Key facts about the formulation and packaging.

Important

  • Do not use on PTFE, polyethylene or polypropylene
  • Temperature during application and for the next 24 hours not below −20 °C, air humidity at least 40 %
  • Reinforce weak mineral substrates with a primer first
  • The adhesive is highly viscous and takes effort to extrude
  • Clean tools with white spirit right after work; dried residue can only be removed mechanically
BaseHybrid MS polymer
ColourWhite
Initial grab300 kg/m²
Application temperature−20 to +40 °C
Service temperature of the joint−40 to +120 °C
Fixing time4–5 s, repositioning up to 30 min
Full cure24 h
Coverage6 mm bead — 14 m per cartridge; up to 160 g/m²
Packaging290 ml cartridge, net weight 550 g, 12 per box
Storage+5 to +20 °C, 24 months; freezing down to −40 °C with gentle thawing
SpecificationTU 20.52.10-002-38433121-2025

Coverage: 6 mm bead — 14 m per cartridge; up to 160 g/m²

Packaging

Packaging images for catalogues and print.

Application guidance

Open the instructions

Preparation

The substrate must be clean and sound; it may be damp. Reinforce weak mineral surfaces with a primer.

Application

Apply the adhesive to the part in strips or dots. The formulation is thick: a high-ratio gun makes the work easier.

Fixing

Place the part and press for 4–5 seconds. Reposition within 30 minutes. Full strength after 24 hours.

Product documents

Technical datasheet

Application conditions and properties

The file will be added

Other products

All products